Dropco multilub systems offers radial lubricator. These are used to discharge metered amount of oil/grease from different plunger pumps incorporated in a common body. Each plunger pump delivers oil/grease at a high pressure to the respective lubrication point independently. Multiline lubricator includes a single pumping station having a number of pumping elements/assemblies placed radially and fixed onto the outer periphery of the housing. The number of pumping elements can be increased or decreased as per customer`s requirement. A cam actuates the pump elements. A speed reduction drive coupled to an electric motor rotates this cam. As the cycle/dose of the pump is adjustable, the multiline lubricator can have pump elements of different cycle/dose. An adjusting screw is given in each pump element, so as to carry out cycle/dose adjustment insitu position also. Reservoir, which stores the grease is given with a reflector plate inside which during the rotation of cam grease stirs continuously. A port in the front side of the housing is given for filling grease into the reservoir. The system is capable to run continuously. However, these types of lubricators are run intermittently through controller where on time is a parameter for running the lubricator and off time is idle.
