Dropco multilub systems offers radial lubricators suitable to discharge metered amount of oil/ grease from different plunger pumps incorporated in a common body. Each plunger pump delivers oil/grease at a high pressure to the respective lubrication point independently. Multiline lubricator includes a single pumping station having a number of pumping elements/assemblies placed radially and fixed on to the outer periphery of the housing. The number of pumping elements can be increased or decreased as perrequirement. A cam actuates the pump elements. . The cam is rotated by a speed reduction drive coupled to an electric motor. The multiline lubricator can have pump elements of different cycle/dose, as the cycle/dose of the pump is adjustable. An adjusting screw is given in each pump element so as to carry out cycle/dose adjustment in-situ. The reservoir, which stores the grease, is provided with a reflector plate, inside which the grease stirs continuously during the rotation of cam. A port in the front side of the housing is given for filling grease into the reservoir. The system is capable to run continuously. However, these types of lubricators are run intermittently through controller where the on time is a parameter for running the lubricator while off time is idle.
