Thread and Form Rolling Machine is offered in compact design and is used for rolling of threads, knurls, cross knurls, worms and spindles etc as well as burnishing. The Machine has the feature that long working piece such as bars up to 6 metres long can be rolled by the through feed rolling method and has efficient and heavy duty gear box for continuous operation. The Machine has low pressure hydraulic power pack to ensure to low heat and minimum maintenance and has user friendly setup and running procedure. The Machine has hardened "T" Type slide for good accuracy and rigidity. The Machine has fabricated steel frame and has approx weight of 1000 kg. The Machine has electrical connection of 415 v, 50 Hz, 3 phase, coolant pump of 1/8 hp, hydraulic power pack motor of 0.75 KW. The Machine has main motor of 2.2 KW, roll spindle speed of 60/ 90 rpm, maximum rolling diameter of 120 mm. The Machine has roll spindle of 40 mm, spindle axis swivel for through feed of 5", maximum rolling force of 8 tons, maximum through feed thread length of 6 meter. The Thread and Form Rolling Machine has maximum die width of 80 mm, maximum serrations pitch of 1 mm, maximum pitch of thread of 3 mm and work piece range from 3 to 24 mm.
