|
| Home > Suppliers Directory > International Marketing Corporation > Water Jet Cutting Technology |
|
|
| Water Jet Cutting Technology |
|
|
|
| View Inquiry Basket |
|
|
|
| |
|
| Product Information |
Zoom Picture • Inquire Now
• Add to Inquiry Basket | International marketing corporation presents water jet cutting technology.
the advantages of the products are as follows:
No heat stress
No finishing treatment
No structural deformations
No burning
No melting
No micro cracks
No gas fumes
No dripping slag
No frayed edges
No butt
Minimal kerf
Minimal loss of water
No chips
No cutting coil
Minimal inner radii
Sharp corners and bevels
No special tools
the energy for material separation is obtained by focusing high pressure, through a fine precious stone orifice.
before that, there is a need to generate the required pressure. The heart of 2d or 3d cutting systems is the high-pressure pump - a streamline intensifier pump with hydraulic drive from ingersoll-rand.
in the primary circuit, hydraulic oil is pre-pressurized using a hydraulic pump. This pressure is then multiplied using the intensifier in the secondary circuit.
in continuous operation, the high-pressure pump can work at up to 3800 bar with a jet stream velocity of 800 m/s [equals 2.5 times the velocity of sound] exiting from the focusing nozzle in the cutting head.
in this way, potential energy can be change into kinetic energy. The cutting water is filtered beforehand in order to protect the high-pressure parts and the intensifier.
the abrasive cutting head with inserted focusing nozzle is integrated into the manipulator, which can either be a root, 2d or 3d gantry. The system can also be integrated into a slitter where the material is moving under the jet. In 3d cutting, the part is lightly fixed on to grids and the manipulator moves the head along the pre-programmed path.
with pure water and no additives, it is possible to cut textiles, elastomers, non wovens, thin plastics etc. With speeds of well in excess of several hundred meters / minute depending upon the material.
in addition, it is used to separate harder materials such as metals, stone bulletproof glass, ceramics etc.
|
|
|
| Supplier's Contact Details |
|
|
| Supplier Name : | International Marketing Corporation |
|
| Address : | 418. Swastik Chambers, Sion Trombay Road, Chembur,
Mumbai - 400071,
Maharashtra,
India. |
| Telephone No. : | 91-22-25228170 / 9833404566 | |
| Fax No. : | 91-22-25228730 | |
|
|
|
|
|
|
| Send Trade Inquiry |
|
|
| | Recently Updated Products | |
|
 |
Rotary Slitter Knives
Apex Knives Private Limited manufactures Rotary slitter knives for slitting and side trimming like cutting thin stainless steel, light ...
Supplier : Apex Knives Pvt. Ltd. |
|
 |
Wood Working Knives
Apex Knives supplies a wide range of Woodworking Knives & Saws to almost 85% of the woodworking industry of India. With strategic tie-u...
Supplier : Apex Knives Pvt. Ltd. |
|
 |
Special Purpose Cutter
Works on the principle of cutting/ shearing materials in-between two sharp edges. Raw materials entering cutter in spreaded fashion wil...
Supplier : Able Manufacturers |
|
 |
Cutter Blades
Bambalio offers Cutter Blades. The features of the Cutter Blades are as follows:
It is mad4e from high quality raw material
L...
Supplier : Bambalio |
|
 |
Shaping Cutters
Mitsubishi Heavy Industries - India Precision Tools [MHI-IPT] has an impressive product line-up. The products are manufactured Uusing s...
Supplier : Mitsubishi Heavy Industries India Pvt. Lrd. |
|
|
|
|
|
