MIG/ MAG Welding Machine can be availed with optional accessories such as co2 regulator cum flow meter, helmet with glass, pair of hand gloves, wire brush, apron and spray. The Machine has length from 540 to 560 mm, width from 260 to 460 mm and height from 410 to 670 mm. The Machine has input supply voltage of 415 v, three phase input supply, input supply frequency of 50 Hz, rating 100% duty cycle from 10 to 20 KVA, has maximum input current at rated output with 415v supply from 14 to 28 amps, open circuit voltage from 16 to 54 V, maximum welding current from 250 to 400 amps, maximum welding current/ load at 100% duty cycle from 25o to 400 Amps/ Volt. The Machine has cable house length of 3 metres and has gas/ water cooling feature. The MIG/ MAG Welding Machine has the feature of forced air cooling, mild steel made wire diameter from 0.8 to 1.2 mm, stainless steel made wire diameter from 0.8 to 1.2 mm, aluminium made wire diameter from 1.2 to 1.6 mm, permanent magnet dc motor, two roll quick release drive system.
