Product Profile of Liquid Vibrating Fork Level Switches
Jaycee Technologies Pvt. Ltd. Manufactures Liquid Vibrating Fork Level Switches. Jaycee Technologies Pvt. Ltd. Offers various types of sensors for industrial processes. The Liquid Vibrating Fork Level Switches has electronically stimulated fork that vibrates at it`s mechanically resonance frequency of 400 Hz when the fork is free of the service material. The resonance is caused by the piezoelectric crystals. One of the piezo crystals produces a small voltage which is transmitted to the switching amplifier. If the fork is covered by the bulk material, a damping effect is produced and the piezo crystal does not produce the voltage and the amplifier will switch and a corresponding signal output is actuated. The vibration of the fork has self-cleaning properties.
Key Features of Liquid Vibrating Fork Level Switches
- Fast and Easy Installation: No Calibration.
- No effect of electrical properties of the Service material: High Reliability.
- Plastic industry, powder, granular etc.
- Field selectable operation logic: Can be configured either for High or Low Level point switching.
- Switching Unit:
- Housing: Aluminum, weather proof, powder coated. Integral with The probe/ suitable for back panel mounting.
- Cable entry: 2 nos.
- Ambient temperature : 0 Degree C to +60 Degree C
- Power consumption : 2 VA
- Mains Voltage : 230/110 V AC [+/-15%], 50 Hz, or 24 V Dc
- Output: 2 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non-inductive loads.
- Switching delay: Continuously adjustable From 2 to 20 sec. probe Free or probe covered.
- Safety operation: Field selected switch over for min. or max. [FSL/FSH] switching points.
- Switch status display: Green LED shows Normal, Red LED shows alarm.
- Fork [Sensing Probe]
- Mounting : Screwed - 1 " BSP [standard]Or Flanged [optional]
- Sense : Fork, Stainless steel
- Extension : Pipe
- Length: 120 mm [standard] up to 3000 mm and as per application.
- Operating Temp in: 150 deg for the integral switching vessel unit. [standard]
Product Specification of Liquid Vibrating Fork Level Switches
- Ambient Temperature:Switching Unit: 0°C to +60°C
- Cable entry:Switching Unit: 2 nos.
- Extensions:Fork (Sensing Probe): Pipe
- Housings:Switching Unit: Aluminum, weather proof, powder coated. Integral with The probe/ suitable for back panel mounting.
- Length:Fork (Sensing Probe): 120 mm (standard) upto 3000 mm and as per application.
- Mains Voltage:Switching Unit: 230/110 V AC (±15%), 50 Hz,or 24 V Dc
- Mounting:Fork (Sensing Probe): Screwed – 1 " BSP (standard)Or Flanged (optional)
- Operating Temperature:Fork (Sensing Probe): 150 deg for the integral switching vessel unit. (standard)
- Output:Switching Unit: 2 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non-inductive loads.
- Power Consumption:Switching Unit: 2 VA
- Safety operation:Switching Unit: Field selected switch over for min. or max. (FSL/FSH) switching points.
- Sense rod:Fork, Stainless steel
- Switch status display:Switching Unit: Green LED shows Normal, Red LED shows alarm.
