Product Profile of Bstw Safety Temperature Monitor With Safety Temperature Limiter
Teknic is the manufacturer of BSTW Safety Temperature Monitor with Safety Temperature Limiter. Teknic is an ISO 9001: 2000 certified company. The BSTW Safety Temperature Monitor with Safety Temperature Limiter is change-over controllers housed in an Ex e certified polyester enclosure. The heaters, fans, motors and other equipment are energized and de-energized by means of this thermostat when specific temperature ranges are exceeded. These devices can also be used to control the temperature in air or on various surfaces.
Key Features of Bstw Safety Temperature Monitor With Safety Temperature Limiter
- 16 A switching capacity
- Pre-set limit point for BSTB
- Suitable for use in Zone 1 + Zone 2 areas
- Temperature setting directly in Zone 1, Zone 21 and 22 areas possible
- Reset table lockout on the device
- Direct heating circuit connection via sheathed cable/cold lead
- Temperature ranges from: -20 degree C to +500 degree C possible
- Dimensions: Single unit 122 x 120 x 90 mm
- Double unit 220 x 120 x 90 mm
- Capillary tube: 1000 mm length
- OD sensor line 1.5 mm
- Min. bend radius 5 mm
- Sensor bulb diameter 6 mm
- Storage temperature: -50 degree C to +65 degree C
- Weight: Single unit 1.1 kg
- Double unit 2.0 kg
- Voltage: AC 250 V/50 Hz
- Current: Switching capacity 16 A NC, 10 A NO
- Connection: 4 Terminals with 2.5 square mm + 1 PE
