Product Profile of NTP Time Server With Status And Configuration Interface
NTP Time Server with Status and Configuration Interface supports various networking protocols such as IPv4, IPv6, HTTPS, HTTP, SSH, TELNET, SCP, SFTP, FTP, SYSLOG and SNMP. NTP Time Server features web based status and configuration interface and console based graphical configuration utility. NTP Time Server is facilitated with up to six independent RJ-45 ethernet interfaces 10/100/1000 MBi. NTP Time Server with Status and Configuration Interface is provided with alert-notification system of status change by Email, WinMail, SNMP or an external connected display.
Paryana Automation Pvt. Ltd offers NTP Time Server with Status and Configuration Interface, manufactured by Meinberg, Germany. Paryana Automation Pvt. Ltd is the supplier of automation and integration solutions such as NTP server, time and frequency synchronization platform, slot card for computers, NTP time server and ethernet data logger.
Key Features of NTP Time Server With Status And Configuration Interface
- Web based status and configuration interface and console based graphical configuration utility
- Supported networking protocols: IPv4, IPv6, HTTPS, HTTP, SSH, TELNET, SCP, SFTP, FTP, SYSLOG, SNMP
- Alert-Notification system of status change by Email, WinMail, SNMP or an external connected display
- Full SNMP v1,v2,v3 support with own SNMP-daemon for status and configuration and SNMP Trap messages
- Antenna connected with up to 300m of standard coaxial cable RG58
- Up to six independent RJ-45 ethernet interfaces 10/100/1000 MBi
Product Specification of NTP Time Server With Status And Configuration Interface
- Notes:The SyncFire 1000 cannot operate as a standard server. Meinberg`s SyncFire 1000 was developed to operate as a powerful NTP time server and does not provide the needed operation system to be deployed as a standard server.
- Operating System:Linux with nano kernel (incl. PPSkit).
- Options available:Additional network interface card with 4 x 10/100/1000 MBit - RJ45 jack.
- Power Supply:Standard: 2 x 100-240 VAC / 800W, redundant power supply, Max. rated current 8 A, Main power fuse 16 A.
- Protocol:Network Time Protocol (NTP) : NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905), SNTP v3 (RFC 1769), SNTP v4 (RFC 2030), MD5 Authentication and Autokey Key Management.; Time Protocol (TIME) - Time Protocol (RFC 868) ; Daytime Protocol (DAYTIME) - Daytime Protocol (RFC 867) ; Hypertext Transfer Protocol (HTTP) - HTTP/HTTPS (RC 2616) ; Simple Network Management Protocol (SNMP) : SNMPv1 (RFC 1157), SNMPv2c (RFC 1901-1908), SNMP v3 (RFC 3411-3418).
- Receiver:Type of receiver : 12 channel GPS C/A-code receiver.
- Support:Network Autoconfiguration Support : IPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131), IPv6: Autoconfiguration Networking - AUTOCONF.; Technical Support : Meinberg offers free lifetime technical support via telephone or e-mail.
- Warranty/Guarantee:Three-Year Warranty.
- Ambient Temperature:10°C - 35°C.
- Antenna Type:Remote powered GPS antenna/converter unit, up to 300m distance to antenna with RG58 and up to 700m distance with RG213 cable.
- Control:Control elements - Eight push buttons to set up basic network parameters and to change receiver settings.
- Display:LC-display, 4 x 20 characters.
- Firmware:Firmware Updates : Firmware is field-upgradeable, updates can be installed directly at the unit or via a remote network connection. Software updates are provided free of charge, for the lifetime of your Meinberg product.
- Form Factor:19 Inch Server Rack 1HE/84TE, 431 mm x 718 mm x 43 mm (W x D x H).
- Humidity:10% - 85%
- Interface:Network Interface : Standard: 2 x 10/100/1000 MBit with RJ45 connector.
