Product Profile of NTP Server with Integrated Satellite Receiver
NTP Server with Integrated Satellite Receiver is based on a 3U BGT chassis that serves as the platform for an extremely flexible and expandable time server to meet the most complex requirements. The NTP Server has web based status and configuration interface and console based graphical configuration utility. The NTP Server features a USB port for installing firmware updates, locking front panel menu access and backup or restore of configuration and log files. NTP Server with Integrated Satellite Receiver has the antenna connected with up to 300m of standard coaxial cable RG58.
Paryana Automation Pvt. Ltd supplies NTP Server with Integrated Satellite Receiver, manufactured by Meinberg, Germany. Paryana Automation Pvt. Ltd offers automation and integration solutions such as NTP server, time and frequency synchronization platform, slot card for computers, NTP time server and ethernet data logger.
Key Features of NTP Server with Integrated Satellite Receiver
- Based on a 3U BGT chassis that serves as the platform for an extremely flexible and expandable time server to meet the most complex requirements
- Web based status and configuration interface and console based graphical configuration utility
- Supported networking protocols: IPv4, IPv6, HTTPS, HTTP, SSH, TELNET, SCP, SFTP, FTP, SYSLOG, SNMP
- Alert-Notification system of status change by Email, WinMail, SNMP or an external connected display
- Full SNMP v1,v2,v3 support with own SNMP-daemon for status and configuration and SNMP Trap messages
- USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of configuration and log files
- Antenna connected with up to 300m of standard coaxial cable RG58
- Up to eight IEEE 1588 PTPv2 interfaces, available via front panel
Product Specification of NTP Server with Integrated Satellite Receiver
- Accuracy:Accuracy of pulse outputs - < ±100ns (OCXO HQ, OCXO DHQ, Rubidium).
- Alarm Output:Synchronous state of the module, relay output (changeover contact).
- Ambient Temperature:0 - 50°C / 32 - 122°F
- Control:Control elements - Eight push buttons to set up basic network parameters and to change receiver settings.
- Data format:Data format of interfaces : Baud rates: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud; Data formats: 7N2, 7E1, 7E2, 7O1, 8E1, 8N1, 8O1; Time strings: Meinberg Standard-Telegram , SAT, Uni Erlangen (NTP), SPA, RACAL, Sysplex, NMEA0183 (RMC, GGA, ZDA), Meinberg GPS, COMPUTIME, ION oder Capture-Telegramm.
- Display:LC-display, 4 x 16 characters
- Form Factor:Rackmount 3U chassis for standard 19" racks
- Frequency:Frequency outputs - 10 MHz via female BNC connector, TTL into 50 Ohm, Accuracy depends on oscillator (standard: OCXO-HQ).
- Humidity:Max. 85%
- Interface:Two independent serial RS232-interfaces, menu configurable.
- Operating System:Operating System of the SBC : Linux with nano kernel (incl. PPSkit).
- Ports:Universal Serial Bus (USB) Ports : 1x USB Port in front panel: - install firmware upgrades, backup and restore configuration files, copy security keys, lock/unlock front keys.
- Power Consumption:Max. 25W with single power supply, Max. 50W with redundant power solution.
- Power Supply:100-240 V AC (50/60 Hz) / 100-240 V DC, Redundant Power Supplies and other DC input voltage ranges available upon request.
- Protocol:Time Protocol (TIME) : Time Protocol (RFC 868) ; Daytime Protocol (DAYTIME) : Daytime Protocol (RFC 867), Hypertext Transfer Protocol (HTTP) : HTTP/HTTPS (RC 2616), Simple Network (SNMP) : SNMPv1 (RFC 1157), SNMPv2c (RFC 1901-1908), SNMP v3 (RFC 3411-3418).
- Pulse Output:Pulse Per Second (PPS) via BNC connector (TTL level), pulse width 200ms.
- Warranty/Guarantee:Three-Year Warranty.
