Product Profile of Dry Floor Repair Mortar For Concrete And Cementitious Floors

Dry Floor Repair Mortar for concrete and cementitious floors is manufactured by the Pidilite Industries Limited. It is polymer modified cement based, ready mixed dry mortar for concrete and cementitious floors. This product is designed for areas, where a low down time is required. Features & Benefits of the Dry Floor Repair Mortar for concrete and cementitious floors are as follows:

• Ready to use with addition of water only.

• Produces high compressive, flexural and tensile strengths for durable repairs.

• Low shrinkage, non-cracking

• Low down time.

• Quick turn around, faster job

• Suitable for interior and exterior applications.

• Excellent resistant to frost & de-icing salts.

• Suitable for repair thickness up to 50 mm thickness

• Light traffic can be allowed after 24 hours Technical Information of the Dr. Fixit are:

• Base: Polymer modified cementitious powder

• Colour : Grey

• Bulk Density : 1.49 ± 0.01 kg / ltr.

• Water / Powder ratio : 1 : 4.5 by volume

• Application time : Approx. 45 min. At 30OC

• Application temperature: 50C to 35OC

• Consumption : Up to 2 sqm at 10 mm thickness for 30 kg pack
Packing of 30 kg of Dry Floor Repair Mortar for concrete and cementitious floors is available from the Pidilite Industries Limited Dry Floor Repair Mortar for concrete and cementitious floors can be applied in the following areas:

• Industrial concrete floors

• Parking decks

• RCC members
Limitations of the use of the Dr. Fixit Dry Floor Repair Mortar for concrete and cementitious floors are as follows:

• Do not undertake application for areas more than 1.5 to 2 sqm at a time

• Adequate care must be taken for construction / expansion joints

• Should not be applied in less than 12 mm thick sections

• Not for floors requiring acid / alkali resistance

• Not for concrete roads repair