www.jimtrade.com
Menu

Uv Protected Seal Joint

Uv Protected Seal Joint

Product Category :    Joints

Supplier                :    B. M. Concor & Co.

Key Features of UV Protected Seal Joint

  • Used for casting joints of concrete units used for manholes, box culverts, pipes and tunnel segments, buildings brick and block work, etc.
  • Made using quality grade polymers and tar and is suitably blended with hydrocarbon and other ingredients. The joint is non-staining type in nature and has UV protection.
  • Effective and durable.


Inquire Now
Product Profile of UV Protected Seal Joint

UV Protected Seal Joint is used for casting joints of concrete units used for manholes, box culverts, pipes and tunnel segments, building`s brick and block work, etc. The Joint is made using quality grade polymers and tar and is suitably blended with hydrocarbon and other ingredients. The Joint is non-staining type in nature and has UV protection. The Joint is effective and durable. The Joint consists of UV absorbers and ozone inhibitors to prevent any undesirable sensitivity to outdoor environments and the sealant does not depend on oxidizing, evaporating or chemical action for its adhesive or cohesive strength. The Joint is capable to withstand and accommodate joint movement with good recovery characteristics and can be easily cut by knife with no crumbs, fibres, and hence clean to work with. The Joint can be used in molten condition by warming up/ heating and does not disintegrate. The Joint is resistant to acids and alkalies, non-impregnated, non-bleeding and non-staining type in nature. The Joint does not discolour architectural substrates and water absorption is virtually non-existent. The Joint has specific gravity of 1.15 minimum, softening point at 90 ° C and has good flexibility, water tightness and is adhesion to concrete. The Joint is resistant to acids and alkalis, to microbiological environment and to chemical and biological attack. The Joint can be used after the joint surfaces have been coated with concorsol and is suitable as a joint seal between pre-cast concrete faces such as manhole covers, pipe joints of concrete and hume pipes conveying sewage, rainwater and surface water, culverts, and any concrete sections/ shapes. The Joint is used for sealing the joints of pre-cast concrete unit and is used for transportation of sewerage and water. The UV Protected Seal Joint is used for manholes, box culverts, pipes and tunnel segments, roads and pavements, structural joints in buildings, building`s brick and block work, isolation joints between adjacent constructions such as buildings, around manholes, drains and the other insets in concrete etc.

Application of UV Protected Seal Joint:

  • Manholes, box culverts, pipes and tunnel segments
  • Roads and pavements, structural joints in buildings
  • Building`s brick and block work
  • Isolation joints between adjacent constructions such as buildings, around manholes, drains and the other insets in concrete etc.
  • Used for sealing the joints of pre-cast concrete unit and is used for transportation of sewerage and water.


  • Key Features of UV Protected Seal Joint
    • Used for casting joints of concrete units used for manholes, box culverts, pipes and tunnel segments, buildings brick and block work, etc.
    • Made using quality grade polymers and tar and is suitably blended with hydrocarbon and other ingredients. The joint is non-staining type in nature and has UV protection.
    • Effective and durable.
    • Consists of UV absorbers and ozone inhibitors to prevent any undesirable sensitivity to outdoor environments and the sealant does not depend on oxidizing, evaporating or chemical action for its adhesive or cohesive strength.
    • Capable to withstand and accommodate joint movement with good recovery characteristics and can be easily cut by knife with no crumbs, fibres, and hence clean to work with.
    • Can be used in molten condition by warming up/ heating and does not disintegrate.
    • Resistant to acids and alkalies, non-impregnated, non-bleeding and non-staining type in nature.
    • Does not discolour architectural substrates and water absorption is virtually non-existent.
    • Specific gravity of 1.15 minimum, softening point at 90 ° c
    • Good flexibility, water tightness and is adhesion to concrete.
    • Resistant to acids and alkalis, to microbiological environment and to chemical and biological attack.
    • Can be used after the joint surfaces have been coated with concorsol and is suitable as a joint seal between pre-cast concrete faces such as manhole covers, pipe joints of concrete and hume pipes conveying sewage, rainwater and surface water, culverts, and any concrete sections/ shapes.
Recently Updated Products



Heat Shrinkable/ Cast Resin Cable Jointing System
Heat Shrinkable/ Cast Resin Cable Jointing System
Supplier    :    Venelec Electromech Industries Pvt Ltd
Inquire Now
Metal Made Joint Crosses
Metal Made Joint Crosses
Supplier    :    Micron Enterprises
Inquire Now
Metal Made Lap Joint
Metal Made Lap Joint
Supplier    :    Ghaziabad Forgings Pvt. Ltd.
Inquire Now
Metal Made Industrial Grade Joint
Metal Made Industrial Grade Joint
Supplier    :    Mikrotech
Inquire Now
Industrial Grade Pup Joint
Industrial Grade Pup Joint
Supplier    :    Shree Umiya Enterprise
Inquire Now