Product Profile of Heavy Duty Lathe Machine

Heavy Duty Lathe Machine has height of centre of 22/ 24", swing in gap of 60", spindle hole of 5", cross slide size of 15" X 28". The Machine has carriage size of 1800 X 1500 mm, cross slide travel of 20", top slide travel of 600 mm, metric range from 0.5 to 7 mm. The Machine has land screw of 50 mm, feed shaft of 30 mm and optional tail stock spindle. The Machine has hard chrome dial, apron box with thread. The Machine is offered with accessories such as steady and follows rest, chuck plate, dead centre, square tool post, shade guard, motor rails and v pulley, belt spart guard. The Machine has between centres of 1800 mm, total height of 1600 mm, and floor space of 1500 X 2500 mm. The Heavy Duty Lathe Machine net weight of 5000 ton and 7.5 HP power requirement.

Key Features of Heavy Duty Lathe Machine

• Height of centre of 22/ 24"
• Swing in gap of 60"
• Spindle hole of 5"
• Cross slide size of 15" X 28".
• Carriage size of 1800 X 1500 mm
• Cross slide travel of 20"
• Top slide travel of 600 mm
• Metric range from 0.5 to 7 mm.
• Land screw of 50 mm
• Feed shaft of 30 mm
• Optional tail stock spindle.
• Between centres of 1800 mm
• Total height of 1600 mm
• Floor space of 1500 X 2500 mm.
• Net weight of 5000 ton
• 7.5 HP power requirement.
• Hard chrome dial, apron box with thread.
• Offered with accessories such as steady and follows rest, chuck plate, dead centre, square tool post, shade guard, motor rails and v pulley, belt spart guard.