Product Profile of Veneer With 5% To15% Moisture Content

Subhnen Decor Pvt. Ltd manufactures Veneer with 5% to15% Moisture Content. Subhnen Decor Pvt. Ltd offers Vitrified tiles, Mica, Veneers, Plywood, Furniture, wall tiles, Wooden flooring, Aluminum Panel Sheets, Canfor, etc. The Veneer with 5% to15% Moisture Content is used in top corporate architects, interior designers, etc.

Technical specifications of Veneer with 5% to15% Moisture Content are:

• Moisture Content: 5% - 15%, 6.80%

• Water Resistant Test: No Delamination / Blister for motion

• Sapwood, Dote, Dead Knots Torned Grain & Decolourisation: Free from Such Defects

• Open Splits, Checks or Open Joints: Not More than 150mm in Length and 0.50mm in width are rectified with a veneer insert bonded with Synthetic resin Adhesive

• Adhesive: MR type Synthetic Resin Adhesive Conforming to IS 848: 1974

• Plywood`s: MR type conforming to IS: 303: 1989

• Veneer: Surface shall be selected for figure, texture, and colour, i.E free from manufacturing and wood defects