Product Profile of Screw Type Digital & Computerized Universal Wood Testing Machine

Screw Type Digital & Computerized Universal Wood Testing Machine is suitable for conducting tensile strength and elongation, compression, bend, shear and other tests on various materials such as metal rubber, plastic, leather, asbestos, PVC, paper, textile, wire/cable, ceramics, rexins, etc. ETS Intarlaken Technologies, an ISO 9001:2000 certified company, is the manufacturer of Screw Type Digital & Computerized Universal Wood Testing Machine.

ETS Intarlaken Technologies supplies diverse types of compression testing machine, tensile testing machine, universal testing machine etc. The Screw Type Digital & Computerized Universal Wood Testing Machine is also be used for conducting variety of tests including compression [parallel-to-grain], shear strength, hardness ,cleavage, static bend, plywood grips, nail/screw withdrawal test and many other tests on wood, plywood, MDF, etc. The Wood Testing Machine operates on 230 volts. 1-ph, 50 c/s. A. C. Mains voltage. One load measurement system is attached with this testing machine which utilizes a four-figure peak picking digital voltmeter which displays maximum load until reset.

Screw Type Digital & Computerized Universal Wood Testing Machine has the following features:

• A screw type motor driven and is suitable for conducting Tensile strength and elongation, compression, bend, shear and other tests on various materials such as metal rubber, plastic, leather, asbestos, PVC, paper, textile, wire/cable, ceramics, rexins, etc.

• The tester may also be used for conducting variety of tests including compression [Parallel-to-Grain], shear strength, hardness , cleavage, static bend, plywood grips, nail/screw withdrawal test and many other tests on wood, plywood, MDF, etc.

• The load measurement system utilizes a four-figure peak picking digital voltmeter which displays maximum load until reset.

• The use of digital roadouts for load and deflection [optional] eliminates the high risk of error involved when interpolating from graphs, dials and scales.

• The elongation is read from a scale graduated in millimetres.

• The machine can also be provided with optional attachments like strip chart recorder and digital elongation readout display.

• The motive power [drive system] is provided by a D.C. Shunt wound motor for constant torque characteristics which is coupled to a lubrication-sealed-for-life gear unit.

• Straining speed [cross-head speed] is infinitely variable by means of a calibrated speed control knob from 0 to 100 mm/min or as desired.

• Return to original setting is at full speed.

• The front panel control consists of strain, stop and return push buttons, Mains lamp, Zero button and Peak hold/ Normal switch and output for use of optional printer.

• An adjustable upper limit setting trip enable users to preset specimen length and a lower adjustable trip prevents any crosshead over travel.

• The basic frame allows a total jaw separation of 1000 mm. However, extended frame having jaw separation up to 2000 mm may be supplied as per requirement.

• The machine is operated on 230 volts. 1-ph, 50 c/s. A. C. Mains or as desired.

• A comprehensive range of grips, attachments/fixtures, cutting dies are available to suit the testing needs of many different industries.

• Capacity Available up to 100KN [ 10000 Kgf].