Product Profile of Manually Operated Mechanical Dock Leveller

Manually Operated Mechanical Dock Leveller is used where lorries with almost identical loading heights are used for uniform fleets, the proper planning of the dock height results in minimal height differences to the loading surface of the vehicles. The Dock Leveller is simple to operate via a control bar. The Dock Leveller uses a flap dock shelter of at least 900 mm depth to bridge the depth of the side brackets and buffers. Manually Operated Mechanical Dock Leveller is designed with entire ramp house with mechanical dock leveller and a side bracket is simply positioned outside in front of the opening.

Hörmann India Pvt. Ltd is engaged in manufacturing Manually Operated Mechanical Dock Leveller. Hörmann India Pvt. Ltd supplies different types of industrial grade doors like steel sliding doors, high speed doors, sliding gates, rolling shutters and rolling grills, sectional garage doors, up-and-over garage doors, entrance gate operators, industrial door operator and entrance doors.

Key Features of Manually Operated Mechanical Dock Leveller

• Used where lorries with almost identical loading heights are used i.e. for uniform fleets, the proper planning of the dock height results in minimal height differences to the loading surface of the vehicles
• Simple to operate via a control bar
• Uses a flap dock shelter of at least 900 mm depth to bridge the depth of the side brackets and buffers
• Comes with dock leveller for fitting into a prepared pit recess in the building floor. The dock leveller can be welded in quickly and easily. Optionally, it can be equipped with a cast box to be completely set in concrete during the construction phase
• Provided with Ramp house with mechanical dock leveller and side brackets is simply positioned outside in front of the opening. It is quickly fitted without a recess in the building and can even be attached to existing ramps. The side brackets, arranged either vertically or horizontally, constitute the sub-construction for the buffer. They can be simply screwed onto the existing screw-in sleeves