Product Category : Wires & Cables
Pagoda cables Pvt. Ltd. Offers Instrumentation cables. Pagoda cables Pvt. Ltd. Is an ISO 9001:2000 Certified company. Instrumentation cables are used for connection of instruments, process control systems, computers, data transmission etc.
Features of the Instrumentation cables are:
Conductor: Annealed bare/ uniform coated with Tinned/Silver Platted, High Conductivity, Electrolytic Grade Solid/Stranded/Flexible Conductor.
Dielectric: Conductor are insulated with General Purpose/HR PVC Compound/Solid/Cellular PE/PP/or any other dielectric material as per customers specification.
Colour of Dielectric: Cores are identified with different type of colour scheme as per IS: 1554[Pt-I]:88, 694:90, IEC, ITD or number Printing and Per Customers Scheme.
Two/Three/Four cores are uniformly twisted together to form a Pair/Triad/Quad with maximum lay length 80 mm/as per requirement of customer. The lay shall be so chosen as to minimize cross talk in the cable.
Individual Shielding may be of Poly Aluminium [Thin Layer of Aluminium Foil bonded to Polyester Film] Tape with Annealed Tinned Copper Drain Wire. It prevents the shorting of adjacent shield and minimizes the cross talk and ground loops. A Tinned Copper drain Wire is installed to provide continuous contact with the shield and allow to connection to ground. Tinning the drain wire reduces galvanic corrosion between drain and shield.
Pair/Triad/Quad is laid up with suitable lay. The outer most layer is right hand lay and successive layers are laid up with opposite lay. Then, a Melinex Tape is provided to bind up laidup Pair/Triad/Quad.
Overall l Shielding may be of Annealed Tinned Copper Braiding/Poly Aluminium [Thin Layer of Aluminium Foil bonded to Polyester Film] Tape with Annealed Tinned Copper Drain Wire. Braiding ATC Shield has high tensile Strength and provides better coverage in flexing application. They are easier to terminate. This provides effective shielding; cross talk and noise are kept to an absolute minimum.
The laid up pair/triad/quad after shielding are provided with an inner sheath which may be either Extruded Inner Sheath or wrap with PVC Tape.
Armoring is applied over inner Sheath. It may consist of galvanized Round Steel wires or galvanized Flat Steel Strips.
|
