Product Profile of Side Bearer Secondary Rubber Spring for Locomotives

M.G.M. Rubber Company manufactures Side Bearer Secondary Rubber Spring for Locomotives. M.G.M. Rubber Company is an ISO 9001:2000 rewarded company. Side Bearer Secondary Rubber Spring for Locomotives is applicable in various sectors like- Railways, Defense, Thermal Power, different Ordinance Factories and various Steel Plants.

Side Bearer Secondary Rubber Spring for Locomotives has the following specifications:

• Technology: Compression/ Transfer/Injection Molding

• Polymer used: NR, SBR, NBR, HNBR, ACM, CR, PU, FE, EPDM, FKM, Silicon, CSM, PBR

• Metal Used: Steel, Cast Iron, Aluminum etc.

• Operation Temperature:-30 -70 degree C

• Operational Atmosphere
:

• Heavy/Dusty/Sandy/Corrosive/Salty

• Operational Humidity: 0 to 100 percent

Technical Specifications of Side Bearer Secondary Rubber Spring for Locomotives are:

• Polymer used: Natural Rubber suitably blended

• Operation Temperature:-10 degree to 70 degree C

• Operational Atmosphere:

• Heavy/Dusty/Sandy/Corrosive/Salty

• Operational Humidity: 0 to 100%

• Shore Hardness: 50 to 60

• Specific Gravity: 1.22 Maximum

• Tensile Strength: 180 Kg/ sq cm Minimum.

• Elongation at Break: 300% Minimum.

• Compression Set: 30% Max.

• Shear Bond Strength:650 PSI / 45.7 Kg/ sq cm

Advantages of Side Bearer Secondary Rubber Spring for Locomotives are:

• Massive variety in dynamic lateral & torsional load carrying range - 0.5 Kg to 30,000 Kg.

• Enhanced damping facility. Up to 50% of the applied Load.

• Extremely rigid quality rubber-metal bonding. Shear Bond strength more than 700 PSI [49.2 Kg/Sq cm].