S. M. Shah & Company offers Mobile Control & Solenoid Hydraulic Valves. S. M. Shah & Company is the importer/stockist/supplier of Hydraulic Valves. Of the Mobile Control & Solenoid Hydraulic Valves, the Solenoid Direction Control Valves come as 4WE6, 4WE10 Single/Double solenoid. These direction control valves consist of housing, one or two solenoids, the control spool & one or two return springs. In the de-energised condition, the control spool is held in neutral or initial position by means of return springs. The control spool is operated by wet pin solenoids and the force of solenoid acts via the plunger on the control spool and pushes this from its neutral position to the required end position. This gives free flow from P to A or B & A to T.
When solenoid is de-energised the control spool is returned to its neutral position by means of return springs. In case of Solenoid Direction Control Valves, care should be taken to make the solenoid pressure chamber filled with oil for smooth operation. These Solenoid hydraulic valves control the start-stop & direction of flow and are also used as pilot valves to operate other valves. Of Mobile Control & Solenoid Hydraulic Valves, Monoblock Direction Control Valves are 40/ 80 LPM basic valves with manual lever, main relief valve, check valve, cylinder spool and spring centered up to 6 levers.
