Product category : Burner

Pune based vulcan eclipse provides a wide range of eclipse wing cone burners. These are a combination of gas/oil burners designed primarily for mounting in air ducts where all of the air required for combustion is available from the air stream flowing through and by the burner. These provide clean combustion throughout the entire operating range and 20 to 1 turndown on both gas and oil making them well suited for use in drying, curing, baking and other air heating process which require clean, hot air, accurate temperature control and the versatility of dual fuel. Since wing cone burners uses air supplied by the system circulating fan, it does not require its own blower. This reduces cost, weight and maintenance and allows the burner to be mounted directly in the duct on the pressure or suction side of the fan. It can also be mounted outside the duct on the suction side of the fan gap or sealed mounted and firing either with the air stream or perpendicular to it. When the burner is firing perpendicular to the air stream, air stream velocity must not exceed 500 fpm. A diffuser plate at the front of the burner keeps the flame length short, making it possible to fit the wing cone into most existing ducts. The flexibility of placement made possible by these characteristics helps to keep piping simple and holds down the cost of installation. All the parts of the burner that are exposed to the flame are constructed from 330 grade stainless steel.