Product Profile of Industrial Computer With Intel Pentium 4 Socket
PAKO Communications Pvt. Ltd manufactures Industrial Computer with Intel Pentium 4 Socket. PAKO Communications Pvt. Ltd is an ISO 9001:2000 certified company. The company manufactures and supplies Industrial Ethernet, I / O Product, Flash Storage and Embedded Industrial PC`s Transportation Controller and Vehicle Mounted PC, Industrial Flash Storage, Rugged Computer, Computer on Module, Embedded Boards, Wide Temperature Boards, Embedded Controller, Water Proof PC etc. The Industrial Computer with Intel Pentium 4 Socket has 10/100Base-TX Ethernet X 2 [Gigabit Ethernet Optional]. The Industrial Computer with Intel Pentium 4 Socket comes with Integrates AGP 8X 2D/3D Graphics Accelerator.
Product Specification of Industrial Computer With Intel Pentium 4 Socket
- Battery:Lithium battery
- BIOS ID string:Award Plug & Play Firmware Hub BIOS - 4Mb ROM
- Chipset:Intel 865G + Intel 82801EB/ER (ICH5/ICH5R optional)
- Ethernet:10/100Base-TX or 10/100/1000Base-TX optional, RJ-45 x 2
Intel® 82562EZ/ 82547GI/ 82551QM /82541GI controller
- Form Factor:PICMG Full-size SBC
- Interface:ISA/ PCI/ Mini PCI Type III
- Memory:184-pin 2.5V DDR DIMM Socket x 4, up to 4 GB
Supports Dual Channels DDR memory (DDR 266/333/400)
Shared memory up to 64MB
- Microprocessor:Intel Pentium 4/ Celeron CPUs, FSB: 400/533/800 MHz ,
supports up to 3.6GHz, does not support Prescott processors
- Operating Temperature:32deg;F ~ 140deg;F (0deg;C ~ 60°C )
- Power Consumption:53W, with Pentium® 4 2.4GHz/ FSB 533MHz/ 512KB L2 Cache
- Power Requirement:ATX 2.1
- Size:13.3"(L) x 4.8"(W) (338mm x 122mm )
- Timer:1 ~ 255 Step, can be set with software on Super I/O
- Controller:VGA: Integrates on Intel 865GV, AGP 8X, Core frequency up to 266MHz
Chrontel CH7017A supports TV-out And LVDS output
- Resolution:Up to 2048 x 1536 @ 32bpp for CRT
Up to 1600 x 1200 @ 24-bit for LCD
- Serial Ports:COM x 2: (Internal Pin Header x 2)
COM 1: RS-232
COM 2: RS-232/422/485
- Storage:ATA-100 x 2 channels (Supports 2 ATAPI devices)
SATA I x 2 (RAID function optional)
CompactFlash Type II x 1
Standard Floppy Disk x 1 (up to 2 devices)
