Evergreen technologies offers pad mist eliminators. Evermesh mist eliminator is fabricated in pad form from symmetrical interlocking loops of knitted metal wire or plastic monofilaments. The pad with a high free volume and large impingement area, can be installed in any existing or new process vessel to provide separation efficiencies up to 99% for particles down to five microns at pressure drops in the vicinity of 25 mm wg. The evermesh mist eliminator is a static, in-line device and in a majority of the cases it can be installed in the evaporator, scrubber, pressure vessel. Etc, without a special housing. When vapour carrying entrained liquid droplets or mist passes through the evermesh mist eliminator, the vapour passes freely through the layered mesh structure of the evermesh mist eliminator but the liquid droplets, having greater inertia, contact the large wire surface exposed and are briefly held there. As more droplets collect, they coalesce and grow in size and become large enough to drain back into the system. The overhead product is pure vapour containing practically no liquid. Normally evermesh mist eliminator will remove droplets down to 5 microns with efficiency up to 99%. This efficiency will vary depending upon the particle size distribution and other operating conditions.
