Product Profile of Die-cast Aluminum Subbase Position Monitoring System

Rexroth is a drive & control company offering drive and control technologies, both specialised and integrated. Rexroth is a wholly-owned subsidiary of robert bosch gmbh. The pneumatics division from rexroth offers the pneumatic position monitoring systems which are a part of control systems. This position monitoring system belongs to the ms01series & the test block has a model number of ms01-al. This test block has the following unique features:

• Ms01-al test block, variant i, with 2 x 3/2-way valve

• Subbase made of die-cast aluminum

• Cleaning pressure can be connected

• Conforms to iso 15407-1, 26 mm standard

• 27.1 mm is its grid dimension

• Maximum working pressure is 10 bar & minimum is 4bar

• Ambient & medium temperature lies between +0deg.C and +50deg.C

• Ip 65 protection class according to en 60529: 2001with electrical connector

• Compressed air medium

• Electrical connector form c for valve

• M12 plug, 5-pin electrical connection for test module

• 5 µm is the maximum particle size

• Oil content of compressed air lies between 0 mg/m cube to 0.1 mg/m cube

• Maximum cleaning pressure is 10 bar

• Ip 67 protection class according to en 60529: 2000

• Duty cycle is 100 %

• Dc operating voltage is 24 v

• Voltage tolerance dc & valve voltage tolerance lies between -10% to +10%

• Aluminum end plates

• Acrylonitrile butadiene rubber seal

• The pressure regulator is preset at 3 bar.

• Expansion options available for pilot valves.